1 SECOND
AUTO
ZONE ALARM ICON
HEART ICON
H
OW TO USE CHRONOGRAPH (WITH HEART RATE MEASUREMENT)
• Press S3 to show Chronograph mode, mode prompt “CHRO” will be displayed for 1 second first.
• Heart icon flashes when heart rate signal is received from the transmitter and the heart rate is shown at the bottom row of the display.
• Press S1 to start the chronograph.
• For the first hour, 1/00-seconds is shown at the top row while minutes and seconds are shown at the middle row of the display.
Then seconds is shown at the top row while hours and minutes are shown at the middle row of the display.
• If both heart rate zone and zone alarm are set to “on”, 1 “Beep” sound will be given every 5 seconds when heart rate is below “Zone Low Limit” and 2 “Beep”
sounds will be given every 5 seconds when heart rate is above “Zone High Limit”.And the displays will be as follow:
• Press S1 again to take split time, flashing “SPL” and taken split time will be shown for 10 seconds, and then display will show current running time of
chronograph.
• Press S2 to stop the chronograph.
28
Below “zone low limit”
Above “zone high limit”
