IBM xSeries 230 61Y, Руководство по техническому обслуживанию аппаратной части

Страница: 144 / 194

Error Code/Symptom FRU/Action
289 (DIMM has been disabled by the user or
system, see
″
Memory Settings
″
on page 34.)
1. Run Configuration/Setup, if disabled by user
2. Disabled DIMM, if not disabled by user.
3.
System Board
301
(Keyboard or keyboard controller error)
1. Keyboard
2. System Board
303 (Keyboard controller error)
1.
System Board
2. Keyboard
602 (Invalid diskette boot record)
1. Diskette
2. Diskette Drive
3. Cable
4. System Board
604
(Diskette drive error)
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
605 (Unlock failure)
1. Diskette Drive
2. Drive Cable
3. System Board
662 (Diskette drive configuration error)
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4.
System Board
762
(Coprocessor configuration error)
1. Run Configuration/Setup
2. Battery
3. Processor
962 (Parallel port error)
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup
3. System Board
11XX (System board serial port 1 or 2 error)
1. Disconnect external cable on serial port.
2. Run Configuration/Setup
3. System Board
0001200
(Machine check architecture error)
1. Processor
2. Optional Processor
3. System Board
0001295 (ECC circuit check)
1.
System Board
1301 (I
2
C cable to front panel not found)
1. Cable
2. Front Panel
3. Power Switch Assembly
4. System Board
136
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y