IBM xSeries 200VL, Руководство по установке

Страница: 34 / 70

22
IBM xSeries 200 and xSeries 200VL: Installation Guide
— A lock, such as a combination lock or padlock
• Read “Safety” on page v and “Handling static-sensitive devices” on page 3.
Complete the following steps to install a U-bolt.
1. Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover (see “Removing the side cover” on page 9
for details).
2. Use a screwdriver to remove the two metal knockouts.
3. Insert the U-bolt through the rear panel; then, attach and tighten the nuts.
4. If you have other options to install or remove, do so now.
5. Reinstall the side cover. See “Installing the cover” for details.
6. Thread the cable through the U-bolt and around an object that is a part of or
permanently secured to the building structure or foundation, and from which it
cannot be removed; then, fasten the cable ends together with a lock.
7. Reconnect the external cables and power cords; then, turn on the peripheral
devices and the server.
Installing the cover
The following information describes the cover installation procedure.
Notes:
1. The illustrations in this document might differ slightly from your hardware.
2. If you removed the support-bracket assembly after you removed the cover,
reinstall it before you install the cover. See “Removing the support-bracket
assembly” on page 10 for details.