IBM xSeries 200VL, Руководство по установке

Страница: 19 / 70

© Copyright IBM Corp. 2001
7
Chapter 2. Installing options
This chapter provides instructions to help you install hardware options in your server.
This section is for all users, but is written with the experienced user in mind. If you
need more detailed installation information for options, refer to the User’s Reference
on the IBM xSeries Documentation CD.
Moving the stabilizing feet
The four feet on the bottom of the server provide additional stability when the feet are
placed in the stabilizing position.
If the feet on your system are similar to the feet in the first illustration below, rotate
them a quarter-turn inward to move them out of the way, or a quarter-turn outwards to
provide stability.
If the feet on your system are similar to the feet in the following illustration, complete
the following steps to place the feet in the stabilizing position.
1. Place the server on its side.
2. Locate the release tab inside the foot; then, lift up on the tab.
Note: The following illustration shows the rear feet located on the bottom rear of
the server.
Release tab
Release tab
Feet (unlocked position)