IBM X 330 Series, Руководство по установке

Страница: 38 / 76

26
IBM xSeries 330 Type 8675: Installation Guide
• Configure serial port assignments
• Change the drive startup sequence
• Enable USB keyboard and mouse support
• Resolve configuration conflicts
• Set the date and time
• Set passwords
• Change the MXT settings
Complete the following steps to start the Configuration/Setup Utility program:
1. Turn on the server and watch the monitor screen.
2. When the message Press F1 for Configuration/Setup appears, press F1.
3. Follow the instructions that appear on the screen.
Using the SCSISelect Utility program
SCSISelect is a built-in, menu-driven configuration utility program that you can use to:
• View the default SCSI IDs
• Locate and correct configuration conflicts
Note: If your server has a redundant array of independent disks (RAID) adapter
installed, use the configuration method that is supplied with the RAID adapter
to view or change SCSI settings for devices attached to the adapter.
Complete the following steps to start the SCSISelect utility program:
1. Turn on the server.
2. When the <<< Press <CTRL><A> for SCSISelect™ Utility! >>> prompt appears,
press Ctrl+A.
3. When the SCSI controller identification appears, press Enter.
4. When the Would you like to configure the host adapter or run the SCSI
disk utility? question appears, make your selection and press Enter.
5. Use the arrow keys to select a choice from the menu.
• Press Esc to exit the SCSISelect Utility program.
• Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
6. Follow the instructions on the screen to change the settings of the selected items;
then, press Enter.