IBM Ultrium Internal Tape Drive T200, Справочное руководство

Страница: 49 / 126

Information Exceptions Mode Page
Table 40. Information Exceptions Mode Page
7 6 5 4 3 2 1 0
0 PS (0) Reserved Page Code (1Ch)
1 Page Length (0A)
2 Perf (0) Reserved DExcept Test Reserved LogErr(0)
3 Reserved MRIE (3)
4
:
7
Interval Timer (0)
8
:
11
Report Count (0)
The Information Exceptions mode page is used to control Exception Reporting by
using the TapeAlert log page.
If the DExcept flag is clear, Exception Reporting is enabled. If the DExcept flag is
set, Exception Reporting is disabled. The default for DExcept is 0.
If the Test flag is set, the next command will fail, the Sense Key will be set to Unit
Attention, and the ASC/ASCQ will be set to Failure Prediction Threshold Exceeded -
False (5DFF). If the Test flag is clear, the next command is processed normally. The
default for Test is 0.
The Perf and LogErr flags must be 0. These features are not supported.
The MRIE field must be 3. If an exception occurs, the next command will get Check
Condition status, the Sense Key will be set to Recovered Error, and the ASC/ASCQ
will be set to Failure Prediction Threshold Exceeded (5D00).
The Interval Timer and Report Count must be set to 0. These fields are not
supported.
Chapter 2. Command Support
35