IBM Ultrium Internal Tape Drive T200, Справочное руководство

Страница: 13 / 126

Preface
This publication contains information about how to use and program the IBM
Ultrium Internal Tape Drive Models T200 and T200F and the IBM 3580 Ultrium Tape
Drive.
Organization
The information in this book is organized as follows:
v
“Chapter 1. Introduction” on page 1 describes the tape drives.
v
“Chapter 2. Command Support” on page 5 lists the SCSI commands that are
supported by the tape drives.
v
“Chapter 3. Error Sense Information” on page 87 describes the error sense
information for the tape drives.
v
“Chapter 4. Sense Keys and Additional Sense” on page 89 describes the sense
keys and additional sense information for the tape drives.
v
“Chapter 5. Attachment Features” on page 93 describes the features of the SCSI
and Fibre Channel tape drives.
Related Publications
v
IBM 3580 Ultrium Tape Drive Setup, Operator, and Service Guide, GA32-0415,
tells how to install and run the IBM 3580 Ultrium Tape Drive. The guide also
describes how to administer basic service procedures.
v
IBM Ultrium Internal Tape Drive Models T200 and T200F Setup, Operator, and
Service Guide, GA32-0435, tells how to install and run the IBM Ultrium Internal
Tape Drive. The guide also describes how to administer basic service
procedures.
v
IBM Ultrium Device Drivers Installation and User’s Guide, GA32-0430, provides
instructions for attaching IBM-supported hardware to open-systems operating
systems. It indicates what devices and levels of operating systems are
supported, gives the requirements for adapter cards, and tells how to configure
servers to use the device driver with the Ultrium family of devices.
v
IBM Ultrium Device Drivers Programming Reference, WB1304, supplies
information to application owners who want to integrate their open-systems
applications with IBM-supported Ultrium hardware. The reference contains
information about the application programming interfaces (APIs) for each of the
various supported operating-system environments.
v
Fibre Channel Arbitrated Loop (FC-AL-2), published by the American National
Standards Institute (ANSI) as NCITS 332:1999.
v
Fibre Channel Tape and Tape Medium Changes (FC-TAPE), published by the
American National Standards Institute. Final draft available as T11/99-069v4 on
the web at
http://www.t11.org
; actual document available from ANSI as NCITS
TR-24:1999.
v
Fibre Channel Protocol for SCSI, Second Version (FCP-2), published by the
American National Standards Institute and available on the web at
http://www.t10.org
.
v
Proposed Addition of Read and Write Attribute Commands to SPC-2, available
on the web at
http://www.t10.org
.
v
SCSI-3 Stream Commands (SSC), published by the American National
Standards Institute and available on the web at
http://www.t10.org
.
© Copyright IBM Corp. 2001, 2000
xi
|
|
|
|
|
|
|
|
|
|
|