IBM TotalStorage Ultrium 3580 L23, Руководство по настройке и эксплуатации

Страница: 27 / 149

Note: If you inserted an invalid or write-protected tape cartridge,
7
appears
in the single-character display. The 3580 Ultrium 2 Tape Drive
unloads the cartridge and exits maintenance mode.
v
If no error is detected, the test will loop and begin again. To stop the
loop, press and hold the unload button for several seconds. When the
loop ends,
0
temporarily appears in the single-character display. The drive
rewinds and unloads the tape, partially ejects the cartridge, then exits
maintenance mode. The solid amber status light turns off and the
following message displays:
Passed!
Tape Unloading
followed by:
Cartridge Unloading
In Progress
then:
Ultrium Tape Drive
Drive Empty
v
If an error is detected, the status light flashes amber, a message similar to
the following displays, and the tape drive posts an error code to the
single-character display.
ERROR!
Drive/Media Error
To determine the error, locate the code in Table 8 on page 55. The tape
drive unloads the tape cartridge, exits maintenance mode, and displays
the following message:
Ultrium Tape Drive
Drive Empty
Note:
To reset the drive after an error occurs, cycle power (turn it off,
then on again).
__ 7. Power-off the 3580 Ultrium 2 Tape Drive.
Chapter 2. Installing
11