12. If you are using the recovery procedure to restore the failed node after
replacing the internal hard disk drive, continue with this step. Otherwise, go to
Step 13. You must now rebuild the Maintenance (D) partition on the new hard
disk drive, as the recovery process only rebuilds the System (C) partition.
Start Disk Management on the failed node. You can do this in one of two
ways:
a. Start a Terminal Services session to the node and click the
IBM NAS
Admin
icon. From the IBM NAS Administration console that appears,
select
Storage
and then
Disk Management
.
b. Start a Windows 2000 for NAS user interface session to the node and
select
Disks and Volumes
. Select
Disks and Volumes
again, and then
provide your administrator user name and password when prompted.
When Disk Management has started, perform these steps:
a. In the Disk Management window, right-click the unallocated area of Disk 0,
and then click
Create Partition
.
b. In the Create Partition wizard, click
Next
and select
Primary Partition
.
c. Click
Next
and select
D:
as the drive letter.
d. Click
Next
and select
FAT32
as the file system. Change the volume label
to
Maintenance
.
e. Click
Finish
to close the wizard. The partition is then formatted. When
formatting is complete, the status of the partition should appear as
Healthy
,
and the other properties should appear as:
v
Name:
Maintenance
v
Drive letter:
D
v
File system:
FAT32
13. On the failed (now recovered) node, follow the procedures for configuring a
joining node located in “Roadmap for setting up and configuring the NAS
Gateway 300” on page 3. The recovered node rejoins the cluster that already
contains the other (operational) node. You will also need to reconfigure any
cluster resource balancing you had set up prior to recovery, so that the
recovered node will once again be the preferred owner of any resources for
which it had been the preferred owner prior to the recovery.
Chapter 9. Using the Recovery and Supplementary CD-ROMs
113
Содержание TotalStorage NAS 300
