IBM TotalStorage NAS 200 25T, Быстрый старт

Страница: 8 / 16

Step 4: Attach cables (Tower configuration)
1. Connect the engine to your network by plugging the network cables to the
Ethernet ports and then into your network. Connect each power cable to
the receptacles on the back of the engine and then to different power source
outlets.
2.
Route the power and network cables through the cable-restraint brackets on
the rear of the appliance. Go to “Step 7: Power on and verify LED status”
on page 9.
1 2
1 2
1 2
6
NAS 200 Model 25T Quick Start Instructions