IBM TotalStorage IP Storage 200i 110, Руководство по установке

Страница: 46 / 94

Accessing the Administrative Console through the Gigabit
Ethernet
The Gigabit Ethernet is not preconfigured with an IP address.
IBM
IP storage
LAN
(same subnet)
Gigabit
switch
Gigabit
Client
Client
Administrative
console
Windows 98, WindowsNT, Millenium, 2000
Internet Explorer or Netscape (direct connection, not proxy)
Java Plug-in 1.3 (see java.sun.com)
http://xxx.xxxx.xxx.xxx:3939/IBM200i
Client
Client
To access the Administrative Console through the Gigabit Ethernet:
1. Launch a Web browser from the management workstation.
2. Point the Web browser to the appliance you are configuring using the following
address. Note that the address is case-sensitive.
http:// IP_address :3939/IBM200i
where IP_address is the unique IP address you want to assign to the appliance.
This address must not be used by other systems in the network. For example:
http://128.1.3.1:3939/IBM200i
When the workstation connects successfully to the appliance, a pop-up window
appears for login and password. Proceed to “Logging in to the Administrative
Console” on page 35.
If the browser times out, the IP-address assignment was not successful. Go to a
command line on the management workstation. Type
arp -a [ n ] (where n is a
user-defined IP address) and press Enter . If the corresponding MAC address does
not match the appliance’s MAC address, then the IP address is used by another
host; repeat this procedure using another IP address. If the ARP entry is resolved to
the correct appliance, delete the resolved entry by typing
arp -d IP_address and
pressing Enter , and repeat this procedure. If you are setting up multiple appliances
simultaneously, retry with a different address after deleting the resolved entry.
Note: After you configure the IP address, use port number 1959 to access the
Administrative Console. For example:
http://128.1.3.1:1959/IBM200i
34
IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide