IBM TotalStorage IP Storage 200i 110, Руководство по установке

Страница: 33 / 94

For 1000BASE-T or 100BASE-TX, your network cable must be Category 5,
twisted-pair cabling. If you plan to run the adapter at 1000 Mbps, it must be
connected to a compatible 1000-Mbps switch.
For 10BASE-T, use Category 3, 4, or 5 twisted-pair cabling. If you want to use this
adapter in a residential environment, you must use a Category 5 cable.
Gigabit Ethernet SX Adapter: Remove and save the fiber-optic connection cover.
Insert a 1000BASE-SX duplex type SC fiber optic connector into the ports on the
Gigabit adapter bracket, as shown in the following illustration. The connector and
ports are keyed for correct orientation.
The fiber-based adapter must be connected to an IEEE 802.3z-compliant gigabit
switch, such as the Intel
®
470 Gigabit Switch.
TX
RX
LIN
K
1
Transmit port
2
Receive port
Figure 7. Attaching a Gigabit Ethernet SX Adapter
Chapter 2. Installation procedures
21