IBM totalstorage 326, Руководство по установке опций

Страница: 44 / 64

10. Turn on the server.
11. Start the Configuration/Setup Utility program and set configuration parameters.
v
Set the system date and time.
v
Set the user (power-on) password.
v
Reconfigure the server.
For for information, see the section about using the Configuration/Setup Utility
program in the User’s Guide on the IBM
Eserver
Documentation CD.
Replacing a fan assembly
The server comes with five replaceable fans.
Complete the following steps to replace the fan assembly. Use this procedure to
replace any fan in the server.
1. Review the safety information beginning on page v, and “Installation guidelines”
on page 9.
2. Turn off the server and all attached peripheral devices. Disconnect all power
cords; then, disconnect all external signal cables from the server.
3. Remove the server from the rack; then, remove the server cover (see
“Removing the cover and bezel” on page 11).
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For information about handling these
devices, see “Handling static-sensitive devices” on page 9.
4. Determine which fan to replace by checking the LED at each fan; a lit LED
indicates the fan to replace.
Note: For more information about the LEDs, see the Hardware Maintenance
Manual and Troubleshooting Guide on the IBM
Eserver
Documentation
CD.
30
326 Type 8848: Option Installation Guide