IBM ThinkPad 380, Руководство пользователя

Страница: 172 / 247

Troubleshooting
Message Action
Test menu.
FDD-1
1
FDD-2
2
HDD Display Memory SystemBoard
Serial CDROM-1 Infrared Audio
Exit
Start
Restart
PCMCIA1
PCMCIA2
Parallel
Select the Start icon and follow the instructions to test your system.
If you cannot go beyond the Test screen, have the computer serviced.
If the computer stops during testing and does not continue, have the
computer serviced.
If testing does not find a problem but one still exists, find the problem in
“What If Testing Cannot Find the Problem?” on page 154.
If the test ends with an error, make a note of the error code and have the
computer serviced.
POST error prompt.
ERROR
OK
Cancel
An error was found during the POST. Press Enter; then select Start from the
test menu to run the test.
If the test ends with an error, make a note of the error code and have the
computer serviced.
Error prompt. Turn off the computer and start Easy-Setup; then select Test to test the
computer.
If the test ends with an error, make a note of the error code and have the
computer serviced.
You can start the operating system by pressing F1 instead and ignore the error.
A screen or message that
is not listed. Turn off the computer and start Easy-Setup; then select Test to test the
computer.
If the test ends with an error, make a note of the error code and have the
computer serviced.
If you cannot start Easy-Setup, have the computer serviced.
152
IBM ThinkPad 380 or 380D User's Guide