IBM System x3105 Type 4347, Руководство пользователя

Страница: 53 / 72

– MAC Address
Select this choice to view the planar Ethernet MAC address.
Note: This choice is available only if at least one Preboot eXecution
Environment (PXE) option, read-only memory (ROM), starts during POST.
– Video
Select this choice to view the video information.
v Date and Time
Select this choice to set the date and time in the server, in 24-hour format
( hour : minute : second ).
v System Security
Select this choice to set passwords. For more information about passwords, see
“Passwords” on page 42. You can also enable the chassis-intrusion detector to
alert you each time the server cover is removed.
This choice is on the full Configuration/Setup Utility menu only.
– Administrator Password
Select this choice to set, change, or delete an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Configuration/Setup Utility menu. If an administrator
password is set, the full Configuration/Setup Utility menu is available only if
you type the administrator password at the password prompt. See
“Administrator password” on page 43 for more information.
– Power-on Password
Select this choice to set, change, or delete a power-on password. If a
power-on password is set, you are prompted to enter the password when you
start the server. See “Power-on password” on page 43 for more information.
v
Startup Options
Select this choice to view or change the start options. Changes in the start
options take effect when you restart the server.
You can set keyboard operating characteristics, such as the keyboard speed, and
you can specify whether the server starts with the keyboard number lock on or
off. You can enable the server to run without a diskette drive, monitor, or
keyboard.
The startup sequence specifies the order in which the server checks devices to
find a boot record. The server starts from the first boot record that it finds. If the
server has Wake on LAN hardware and software and the operating system
supports Wake on LAN functions, you can specify a startup sequence for the
Wake on LAN functions. You can also specify whether a PCI SCSI adapter has
boot precedence.
If you enable the boot fail count, the BIOS default settings will be restored after
three consecutive failures to find a boot record.
You can enable a virus-detection test that checks for changes in the boot record
when the server starts.
This choice is on the full Configuration/Setup Utility menu only.
– Startup Sequence Options
Select this choice to view the Startup Sequence menu. The startup sequence
specifies the order in which the server checks devices to find a boot record.
The server starts from the first boot record that it finds.
v
Advanced Setup
Select this choice to change settings for advanced hardware features.
Chapter 3. Configuring the server
41