IBM RackSwitch G8000, Руководство по установке

Страница: 70 / 86

Table 19. IBM RackSwitch G8000 replaceable parts (continued)
Description Model
Option part
number Tier 1 CRU part
number
Cable, 5m IBM passive G52
52F
HC3
HC4 90Y9433 90Y9432
Cable, 8.5 m IBM passive G52
52F
HC3
HC4 90Y9436 90Y9435
Cable, 2 m DC power CD8
CFC
HC8
HCC Cable, 2 m DC
power Cable, 2 m DC
power
Kit, serial cable G52
52F
HC3
HC4 Not applicable 59Y1967
Kit, 2-post rack mounting G52
HC3 Not applicable 90Y3532
IBM System Networking adjustable
19" 4-post rail G52
52F
HC3
HC4 00D6185 00D6119
1U, air duct, 483 mm 1611-16E 00D6146 00D6120
For your safety, a power cord with a ground attachment plug is available to order
for use with this product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
Power cords for this product that are used in the United States and Canada are
listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum of 18 AWG, Type SVT or SJT, three-conductor
cord, a maximum of 15 feet in length and a parallel blade, grounding-type
attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S.): Use a UL-listed and
CSA-certified cord consisting of a minimum of 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
Power cords for this product for a specific country or region are usually available
only in that country or region.
54
IBM System Networking RackSwitch G8000: Installation Guide