IBM RackSwitch G8000, Руководство по установке

Страница: 33 / 86

Product name IBM System Networking RackSwitch G8000
Model number _____________________________________________
Serial number _____________________________________________
Part number _____________________________________________
Media access control
(MAC) address for switch _____________________________________________
MAC addresses for other
components _____________________________________________
_____________________________________________
_____________________________________________
Required tools
You need the following tools or equipment to install the RackSwitch G8000:
v
Standard flat-blade screwdriver
v
#2 Phillips screwdriver
v Electrostatic discharge wrist strap
Package contents
The basic RackSwitch G8000 package contains the following items:
v G8000 switch unit (one of the following):
– G8000 (front-to-rear) provides front-to-rear air flow
– G8000 (rear-to-front) provides rear-to-front airflow
v
One standard rack mount kit that includes:
– Two brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
v Mini-USB to RJ-45 serial cable, category 5 patch cable, RJ-45 to DB9 adapter
v
Two AC power cords
v One IBM Documentation CD which includes the IBM System Networking
RackSwitch G8000 Installation Guide (this document)
v
One Warranty Information document
v One Important Notices document
Environmental requirements
This section describes the basic environmental requirements for the RackSwitch.
Make sure the location where you install the switch meets the following
requirements:
v
Install the switch unit in a dry, clean, well-ventilated area.
v Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.
v
Make sure that an adequate grounded power supply is within reach of the switch
unit.
v Make sure that twisted-pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.
Chapter 2. Installing the RackSwitch and options
17