Chapter 2. Architecture and technical overview
79
Draft Document for Review October 14, 2014 10:19 am
5137ch02.fm
Connect the other end of the optical cable to connector T1 on one of the PCIe3 6-slot
fanout modules in your expansion drawer.
Connect another cable to connector T2 on the PCIe3 optical cable adapter in your server.
Connect the other end of the cable to connector T2 on the PCIe3 6-slot fanout module in
your expansion drawer.
Repeat above 4 steps for the other PCIe3 6-slot fanout module in the expansion drawer.
Figure 2-25 shows connector locations for the PCIe Gen3 I/O expansion drawer.
Figure 2-25 Connector locations for the PCIe Gen3 I/O expansion drawer
Drawer connections: Each fanout module in a PCIe3 Expansion Drawer cannot be
connected to two different systems. However it can be connected to different system nodes
in a system.