IBM Power System 5802, Инструкция по эксплуатации

Страница: 48 / 64

Model 8412-EAD connector locations
Learn about connector locations.
The 8412-EAD server provides cable connector locations for the following enclosures:
v
Support for expansion units, as shown in the following figure, is as follows:
– The card installed in the C2 slot can contain two 12X double data rate (DDR) cable ports. However,
the C2 slot cannot provide both 12X DDR and PCIe cable ports.
– The card installed in the C3 slot can contain two 12X DDR cable ports. However, the C3 slot cannot
provide both 12X DDR and PCIe cable ports.
v Support for disk drive enclosures, as shown in the following figure, is as follows:
– The server contains a SAS port.
v
Support for PCIe storage enclosures, as shown in the following figure, is as follows:
– The card installed in the C2 slot can contain two PCIe cable ports. However, the C2 slot cannot
provide both PCIe and 12X DDR cable ports.
– The card installed in the C3 slot can contain two PCIe cable ports. However, the C3 slot cannot
provide both PCIe and 12X DDR cable ports.
Figure 39. Model 8248-L4T, 8408-E8D, or 9109-RMD connector locations for expansion units, disk drive enclosures,
and PCIe storage enclosures
36
Power Systems: Installing the 5802 and 5877 expansion units