manualshive.com logo in svg

IBM Power 750 Express, Технический обзор и введение, Страница: 151 / 204

Поделиться
Скачать
IBM Power 750 Express Скачать руководство пользователя страница 151

Chapter 3. Virtualization 

137

A possibility is to migrate partitions back and forth between POWER6, , POWER7 
and  processor-based servers. Partition Mobility uses the POWER6 or  
Compatibility Modes that are provided by POWER7 and  processor-based servers. 
On the  processor-based server, the migrated partition is then executing in 
POWER6 or  Compatibility Mode.

If you want to move an active logical partition from a POWER6 processor-based server to a 
processor-based server so that the logical partition can take advantage of the 
additional capabilities available with the  processor, use the following steps:

1. Set the partition-preferred processor compatibility mode to the default mode. When you 

activate the logical partition on the POWER6 or processor-based server, it 
runs in the POWER6 or  mode.

2. Move the logical partition to the  processor-based server. Both the current 

and preferred modes remain unchanged for the logical partition until you restart the 
logical partition.

3. Restart the logical partition on the processor-based server. The hypervisor 

evaluates the configuration. Because the preferred mode is set to default and the logical 
partition now runs on a processor-based server, the highest mode available is 
the  mode. The hypervisor determines that the most fully featured mode that is 
supported by the operating environment installed in the logical partition is the POWER7 
mode and changes the current mode of the logical partition to the POWER7 mode. 

Now the current processor compatibility mode of the logical partition is the POWER7 mode, 
and the logical partition run on the  processor-based server.

The Virtual I/O Server on the source system provides the access to the client resources and 
must be identified as a mover service partition (MSP). The Virtual Asynchronous Services 
Interface (VASI) device allows the mover service partition to communicate with the hypervisor. 
It is created and managed automatically by the managed console and will be configured on 
both the source and destination Virtual I/O Servers, which are designated as the mover 
service partitions for the mobile partition, to participate in active mobility. Other requirements 
include a similar time-of-day on each server, systems must not be running on battery power, 
and shared storage (external hdisk with 

reserve_policy=no_reserve

). In addition, all logical 

partitions must be on the same open network with RMC established to the managed console.

The managed console is used to configure, validate, and orchestrate. You use the managed 
console to configure the Virtual I/O Server as an MSP and to configure the VASI device. 
A managed console wizard validates your configuration and identifies issues that can 
cause the migration to fail. During the migration, the managed console controls all phases 
of the process.

Support of both processors: Because POWER7 and  use the same 
Instruction Set Architecture (ISA), they are equivalent regarding partition mobility, that is 
POWER7 Compatibility Mode supports both POWER7 and  processors.

Tip: The following web page offers presentations of the supported migrations:

http://pic.dhe.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/p7hc3/iphc3p
cmcombosact.htm

Содержание Power 750 Express













































































































































































































Отзывы:

Нет отзывов