background image

94

 

IBM Power 750 and 760 Technical Overview and Introduction

2.10.6  IBM System Storage

The IBM System Storage Disk Systems products and offerings provide compelling storage 
solutions with superior value for all levels of business, from entry-level to high-end 
storage systems.

IBM System Storage N series

The IBM System Storage N series is a network-attached storage (NAS) solution. It provides 
the latest technology to help you improve performance, virtualization manageability, and 
system efficiency at a reduced total cost of ownership. For more information about the 
hardware and software, see the following website:

http://www.ibm.com/systems/storage/network

IBM Storwize V3700

IBM Storwize® V3700, the most recent addition to the IBM Storwize family of disk systems, 
delivers efficient, entry-level configurations specifically designed to meet the needs of small 
and midsize businesses. Designed to provide organizations with the ability to consolidate and 
share data at an affordable price, Storwize V3700 offers advanced software capabilities 
usually found in more expensive systems. For more information, see the following website:

http://www.ibm.com/systems/storage/disk/storwize_v3700/index.html

IBM System Storage DS3500 

IBM System Storage DS3500 combines best-of-its-kind development with leading 6 Gbps 
host interface and drive technology. With its simple, efficient and flexible approach to storage, 
the DS3500 is a cost-effective, fully integrated complement to IBM System x® servers, IBM 
BladeCenter and IBM Power Systems. By offering substantial improvements at a price that 
fits most budgets, the DS3500 delivers superior price for performance ratios, functionality, 
scalability and ease of use for the entry-level storage user. For more information, see the 
following website:

http://www.ibm.com/systems/storage/disk/ds3500/index.html

IBM Storwize V7000 and Storwize V7000 Unified Disk Systems

IBM Storwize V7000 and Storwize V7000 Unified are virtualized storage systems designed to 
consolidate workloads into a single storage system for simplicity of management, reduced 
cost, highly scalable capacity, performance and high availability. They offer improved 
efficiency and flexibility through built-in solid-state drive (SSD) optimization, thin provisioning 
and nondisruptive migration of data from existing storage. They can also virtualize and reuse 
existing disk systems offering a greater potential return on investment. Storwize V7000 and 
V7000 Unified now supports integrated IBM Real-time Compression™, enabling storage of 
up to five times as much active primary data in the same physical space for extraordinary 
levels of efficiency.

The IBM Flex System™ V7000 Storage Node is also available as an integrated component of 
IBM Flex System and IBM PureFlex™ Systems and has been seamlessly integrated into the 
Flex System Manager and Chassis Map, delivering new data center efficiencies. For more 
information, see the following website:

http://www.ibm.com/systems/storage/disk/storwize_v7000/index.html

IBM XIV Storage System

IBM XIV® is a high-end disk storage system, helping thousands of enterprises meet the 
challenge of data growth with hotspot-free performance and ease of use. Simple scaling, high 

Содержание Power 750 Express













































































































































































































Отзывы: