IBM PCI Cryptographic Coprocessor, Инструкция по установке и использованию

Страница: 20 / 34

__ 3. Perform an NFS mount of the lppsource directory by typing the following:
dsh mount <controlwks>:
/spdata/sys1/install/<lppsource_name>/lppsource /mnt
<controlwks>
is the name of the Control Workstation recognized by the nodes.
<lppsource_name>
is the name you recorded earlier in “Checking System
Prerequisites” on page 7.
__ 4. Perform a preview of the files to be installed on the nodes by typing the following
at the system prompt:
dsh "installp -p -acqXd /mnt device driver 2>&1" | more
device driver is the fileset that must be installed for the adapter. The list includes:
v
devices.pci.14109f00
__ 5. Install the device driver by typing the following at the system prompt:
dsh "installp -acqXd /mnt device driver 2>&1" | more
device driver is defined in the previous step.
After the device driver is installed on the node, contact your service provider to
have the adapter installed.
12
PCI Cryptographic Coprocessor Installation and Using Guide