IBM PCI Cryptographic Coprocessor, Инструкция по установке и использованию

Страница: 14 / 34

6. Select or type your input device:
v
Press F4 to display the input device list. Select the name of the device (for
example; CD-ROM) that you are using and press Enter.
OR
v
In the entry field, type the name of the input device you are using and press
Enter.
The Install Additional Device Software window highlights the SOFTWARE to
Install option.
7. Press F4 to display the SOFTWARE to Install window.
8. Type the following to display the Find window:
/
9. Type the following:
devices.pci.14109f00
10. Press Enter. The system finds and highlights this device driver software.
11. Press F7 to select the highlighted device driver software.
12. Press Enter.
13. The INSTALL ADDITIONAL DEVICE SOFTWARE screen displays. The entry fields
are automatically updated. Press Enter to accept the information.
14. The ARE YOU SURE window displays. Press Enter to accept the information.
15. The COMMAND STATUS screen displays.
v
The term
RUNNING
is highlighted to indicate that the installation and configuration
command is in progress.
v
When
RUNNING
changes to
OK
, scroll to the bottom of the page and locate the
Installation Summary.
v
After a successful installation,
SUCCESS
displays in the Result column of the
Installation Summary at the bottom of the page.
16. Remove the installation media from the drive.
17. Press F10 to exit SMIT.
18. Go to Chapter 4, “Installing the PCI Cryptographic Coprocessor” on page 13.
6
PCI Cryptographic Coprocessor Installation and Using Guide