IBM PC 300PL Types 6862, Руководство пользователя

Страница: 94 / 190

Working with memory
You can add memory to your computer to increase system performance.
Your computer has two connectors for installing memory modules that
provide up to a maximum of 1 GB of system SDRAM.
Your computer uses dual inline memory modules (DIMMs). The
IBM-installed DIMMs that come with your computer are unbuffered,
synchronous dynamic random access memory (SDRAM).
When installing or replacing DIMMs, the following rules apply:
Ÿ
Fill each system memory connector sequentially, starting at DIMM 0.
Ÿ
Use only 3.3 V, 133 MHz, unbuffered, SDRAM DIMMs.
Ÿ
Use only 64, 128, 256, or 512 MB DIMMs in any combination of
supported SDRAM DIMMs.
Note: To locate the memory connectors on the system board, see the
system board label inside your computer.
Before you begin:
Ÿ
Read “Safety information” on page ix and “Handling
static-sensitive devices” on page 61.
Ÿ
Read the instructions that come with the new system memory.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer and remove the
computer cover (see “Removing the cover — tower model” on
page 68 or “Removing the cover — desktop model” on page 64).
Ÿ
Read “Accessing the system board” on page 74 to learn the
location of the parts on the system board.
Notes:
1. You might need to remove the power supply to gain access to the
DIMM sockets. See “Moving the power supply — desktop model” on
page 66 or “Moving the power supply — tower model” on page 71.
2. You might have to remove an adapter to access the DIMM sockets.
76
PC 300PL and PC 300GL User Guide