IBM PC 300PL Types 6862, Руководство пользователя

Страница: 116 / 190

Starting the Configuration/Setup Utility program
When you restart the computer for the first time after working with most
options, a message might appear indicating that a configuration change has
occurred. If such a message appears, you are prompted to enter the
Configuration/Setup Utility program to manually update the configuration
settings or to confirm and save the settings that were automatically updated
by the system programs.
After you change an option and restart the computer, the following screen
might appear.
à ð
POST Startup Error(s)
The following error(s) were detected when the system was
started:
162 Configuration Change Has Occurred
Select one of the following:
Continue
Exit Setup
á ñ
Note: Depending on the configuration changes that occurred, the error
message you see might be different from the one shown here. If the
preceding screen appears, select Continue until you reach the
Configuration/Setup Utility program menu (see Chapter 4, “Using
the Configuration/Setup Utility program” on page 39).
If the preceding screen does not appear, use the Configuration/Setup Utility
program to configure your computer. For more information, see Chapter 4,
“Using the Configuration/Setup Utility program” on page 39.
Configuring startup devices
When your computer is turned on, it looks for an operating system. The
order in which it searches devices for the operating system is the startup
sequence. After adding new devices to the computer, you might want to
change the startup sequence. You can use the Configuration/Setup Utility
program to configure startup devices. See “Setting the startup sequence”
on page 50.
98
PC 300PL and PC 300GL User Guide