IBM PC 300PL Types 6862, Руководство пользователя

Страница: 64 / 190

power-on password cannot be changed unless the administrator
password is entered.)
7. Select Change Administrator Password and follow the instructions on
the screen.
8. Press Esc until you return to the Configuration/Setup Utility program
menu.
9. Select Save Settings from the Configuration/Setup Utility program
menu, then press Esc and follow the instructions on the screen.
Erasing a lost or forgotten password
Important
If possible, run ConfigSafe (or a similar application) to take a snapshot of
your computer configuration before moving the Clear CMOS switch. If
you have problems configuring after clearing CMOS, ConfigSafe allows
you to restore the configuration to the previous settings.
To erase a lost or forgotten password:
1. Turn off the computer and all attached devices.
2. Unplug the power cords for the computer and all attached devices
from electrical outlets.
3. Remove the cover. See “Removing the cover — desktop model” on
page 64 or “Removing the cover — tower model” on page 68.
4. See the system board label inside the computer to locate the Clear
CMOS switch (switch 2 on the small rocker switch).
5. Move switch 2 from the OFF to the ON position.
6. Replace the cover.
7. Plug in the power cord. The computer will beep after about 30
seconds.
8. Press and hold the power switch for about 5 seconds to turn off power.
9. Unplug the power cord and remove the cover. See “Removing the
cover — desktop model” on page 64 or “Removing the cover — tower
model” on page 68.
10. Move switch 2 back to the OFF position.
11. Replace the computer cover.
12. Plug in the power cord.
46
PC 300PL and PC 300GL User Guide