IBM PC 300GL Type 6563, Руководство пользователя

Страница: 97 / 190

Working with adapters
This section provides information and instructions for installing and
removing adapters.
PCI adapters
All adapters supported by your computer use Plug and Play technology that
enables the computer to automatically configure the adapter. For more
information, see “Updating the computer configuration” on page 97.
Adapter slots
Your computer system board has three peripheral component interconnect
(PCI) expansion slots used to connect adapters to the bus. There is also one
AGP adapter slot. You can install an adapter up to 330 mm (13 inches)
long in the desktop model and 228 mm (9 inches) long in the tower model.
Installing adapters — desktop model
Before you begin:
Ÿ
Read “Safety information” on page ix and “Handling
static-sensitive devices” on page 61.
Ÿ
Read the instructions that come with the new adapter.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer and remove the
computer cover (see “Removing the cover — desktop model” on
page 64).
To install an adapter:
1. Remove the screw and slot cover for the appropriate expansion slot.
2. Remove the adapter from its static-protective package.
3. Install the adapter into the appropriate slot on the system board.
Chapter 5. Installing options
79