13
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the
1
(power) indicator will either light up green or
flash amber. If the
1
(power) indicator is lit in amber, the
computer is in power saving mode. Try pressing any key on the
keyboard.
If the screen is blank and the
1
(power) indicator
is green
1
Disconnect the video input cable or turn off the
connected computer.
2
Press the
1
(power) button twice to turn the monitor
off and then on.
3
Press the
,
button for 2 seconds.
If the monitor information and all four color bars appear (white,
red, green, blue), the monitor is working properly. Reconnect the
video input cable and check the condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized technical support of the monitor’s
condition.
If the
1
(power) indicator is flashing amber
Press the
1
(power) button twice to turn the monitor off
and then on.
If the
1
(power) indicator lights up green, the monitor is working
properly.
If the
1
(power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between amber
flashes of the
1
(power) indicator and inform your authorized
technical support of the monitor’s condition. Be sure to note the
model name and serial number of your monitor. Also note the
make and model of your computer and video board.
Specifications
CRT
0.24 mm aperture grille pitch (center)
17 inches measured diagonally
90-degree deflection
Trinitron
Viewable image size
Approx. 326.7
×
242.5 mm (w/h)
(12
7
/
8
×
9
5
/
8
inches)
Viewing image
Approx. 406.4 mm (16.0 inches)
Resolution
Maximum
Horizontal: 1600 dots
Vertical: 1200 lines
Recommended
Horizontal: 1024 dots
Vertical: 768 lines
Standard image area
Approx. 312
×
234 mm (w/h)
(12
3
/
8
×
9
1
/
4
inches)
Deflection frequency*
Horizontal: 30 to 94 kHz
Vertical: 48 to 170 Hz
AC input voltage/current 100 to 240 V, 50-60 Hz, Max. 1.7 A
Power consumption
Approx. 105 W
Dimensions
Approx. 414
×
418
×
428 mm (w/h/d)
(16
1
/
4
×
16
1
/
2
×
16
7
/
8
inches)
Mass
Approx. 19 kg (41.9 lb)
Plug and Play
DDC2B/DDC2Bi
GTF**
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
Preset mode timing table
**If the input signal does not match one of the factory preset
modes above, the Generalized Timing Formula feature of this
monitor will automatically provide an optimal image for the
screen as long as the signal is GTF compliant.
1
(power) indicator
No. Resolution
(dots
×
lines)
Horizontal
Frequency
Vertical
Frequency
Graphics
Mode
1
640
×
480
31.5 kHz
60 Hz
VGA-G
2
640
×
480
37.5 kHz
75 Hz
VESA
3
640
×
480
43.3 kHz
85 Hz
VESA
4
800
×
600
46.9 kHz
75 Hz
VESA
5
800
×
600
53.7 kHz
85 Hz
VESA
6
1024
×
768
60.0 kHz
75 Hz
VESA
7
1024
×
768
68.7 kHz
85 Hz
VESA
8
1280
×
1024
80.0 kHz
75 Hz
VESA
9
1280
×
1024
91.1 kHz
85 Hz
VESA
10 1600
×
1200
93.8 kHz
75 Hz
VESA
