IBM P76, Руководство по эксплуатации

Страница: 26 / 38

18
Additional Information
Specifications
Picture tube 0.24 mm aperture grille pitch
17 inches measured diagonally
90-degree deflection
Viewable image size Approx. 327
×
243 mm (w/h)
(12
7
/
8
×
9
5
/
8
inches)
16.0” viewable diagonal
Resolution Horizontal: Max. 1600 dots
Vertical: Max. 1200 lines
Standard image area Approx. 312
×
234 mm (w/h)
(12
3
/
8
×
9
1
/
4
inches)
Deflection frequency Horizontal: 30 to 94 kHz
Vertical: 48 to 120 Hz
256
<
Total Line
<
1700
AC input voltage/current
100 to 240 V, 50/60 Hz, Max. 1.7 A
Power consumption Max. 130 W
Dimensions Approx. 404
×
413.5
×
419.5 mm
(w/h/d)
(16
×
16
3
/
8
×
16
5
/
8
inches)
Mass Approx. 20 kg (44 lb 1 oz)
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than
3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without
notice.
Self-diagnosis Function
This monitor is equipped with a self-diagnosis function. If
there is a problem with your monitor or computer, the
screen will go blank and the
u
indicator will either light up
green or flash orange.
If the
u
indicator is green
1
Disconnect the video input cable or turn off the
connected computer.
2
Press the
u
button twice to turn the monitor off and
then on.
3
Press and hold the
/
button for 2 seconds before
the monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the
monitor is working properly. Reconnect the video input
cable and check the condition of your computer.
If the color bars do not appear, there is a potential monitor
failure. Inform your service representative of the monitor’s
condition.
If the u indicator is flashing orange
Press the u button twice to turn the monitor off and
then on.
If the u indicator lights up green, the monitor is working
properly.
If the u indicator is still flashing, there is a potential
monitor failure. Inform your service representative of the
monitor’s condition. Be sure to note the model name and
serial number of your monitor. Also note the make and
model of your computer and video board.
u indicator