IBM NetVista 6029, Руководство по техническому обслуживанию аппаратной части

Страница: 32 / 136

3. To locate the DIMM connectors. See “Identifying parts on the system board” on
page 24.
4.
Open the retaining clips.
5. Make sure the notches in the DIMM align with the tabs on the connector. Push
or insert the DIMM straight down into the connector until the retaining clips
close.
Notches
To remove a DIMM:
1. Remove the cover. See “Removing the cover” on page 23.
2.
You might have to remove an adapter to gain access to the DIMM slots. See
“Installing and removing adapters” on page 27.
3. To locate the DIMM connectors. See “Identifying parts on the system board” on
page 24.
4.
Open the retaining clips.
5. Lift the DIMM out of the DIMM slot.
6. Close the retaining clips.
What to do next:
v
Replace any adapters that were removed.
v
Replace the power supply.
v
To work with another option, go to the appropriate section.
v
To complete the installation, go to “Replacing the cover and connecting the
cables” on page 33.
26
Hardware Maintenance Manual