IBM Netfinity ServeRAID-4L Ultra160, Справочник пользователя

Страница: 55 / 114

v
Copy the Configuration from Drives to Controller reads the most common
configuration from the drives in the server and copies it to the ServeRAID
controller.
v
Configure BIOS Settings is used to modify the BIOS settings, such as the BIOS
Compatibility Mapping, for the ServeRAID controller.
Note: The Multiple Controller mode for extra BIOS has two settings: Erase and
Shrink. When this parameter is set to Erase, redundant copies of the
ServeRAID BIOS are erased. When this parameter is set to Shrink, the
redundant copies of the ServeRAID BIOS are removed from memory but
stored in the controller for future use. When multiple ServeRAID
controllers are installed, you need only one active copy of ServeRAID
BIOS. However, to ensure that you have a copy of the ServeRAID BIOS
available if your active copy becomes defective or unavailable, leave the
Multiple Controller parameter set to Shrink.
v
View Controller and PCI Information shows the ServeRAID controller hardware
and PCI register information.
v
Exit is used to exit from the Mini-Configuration program.
Chapter 6. Using the ServeRAID Mini-Configuration program
41