IBM Netfinity ServeRAID-4L Ultra160, Справочник пользователя

Страница: 47 / 114

Note: To change the configuration, click Modify arrays or Modify logical
drives.
16. Click Apply to accept and save the configuration. The configuration is saved in
the ServeRAID controller and on the physical drives.
17. If you have multiple controllers, for each controller repeat steps 1 on page 29
through step 16.
18. When you have completed configuration, you can change to Information mode
and change controller settings. See “Using Information mode” on page 34 for
more information. If you do not want to change any settings, exit the
ServeRAID Manager program and remove the CD from the CD-ROM drive.
19. Restart the server.
20. Continue with “Chapter 5. Installing ServeRAID device drivers” on page 35 to
install the ServeRAID device driver while installing your operating system.
Note: If you are configuring your startup (boot) ServeRAID controller, you
must install the device driver while installing the operating system.
Figure 12. Configuration summary window
Chapter 4. Configuring ServeRAID controllers
33