IBM Netfinity 5Ux24D Tower-to-Rack Kit, Руководство по установке

Страница: 24 / 38

3. Use the pins
A
on the slide rail to align the slide rail to the rack; then, use four M6 screws (two in
front and two in the rear) to secure the rail to the rack.
A
Figure 20. Installing the slide rails
Note: Install the left and right slide rails before continuing with the installation.
4. Install the cable-management arm assembly:
B
A
Figure 21. Assembling and installing the cable-management arms
a. Secure the hinge bracket
A
to the right rear of the rack, below the slide rail, with two M6 screws.
b. Connect the other end of the cable-management arm assembly to the right slide rail with one
hinge pin
B
.
Note: You must position the cable-management arms as shown in figure Figure 21.
16
5Ux24D Tower-to-Rack Kit Installation Instructions