IBM Netfinity 5Ux24D Tower-to-Rack Kit, Руководство по установке

Страница: 14 / 38

11. Install the new bottom cover
A
that comes with this kit:
B
A
Figure 5. Installing the new bottom cover
a. Carefully turn the server top-side down on a flat surface; then, select one of the server covers to
use as the bottom cover.
Note: Both covers are the same, and you can use either one for the top or bottom cover. You
will install the other one later as the server top cover.
b. Align the bottom cover
A
with the frame of the server; then, slide the cover toward the front of
the server, making sure that the tabs on the rear of the cover fit into the slots on the rear of the
server.
c. Secure the bottom cover in place with the two screws
B
that come with this kit.
12. Carefully turn the server top-side up on a flat surface; then, remove the four feet
A
from the server.
A
Figure 6. Removing the server feet
6
5Ux24D Tower-to-Rack Kit Installation Instructions