IBM N3400, Инструкции по установке и настройке

Страница: 7 / 30

Installation and setup instructions
Use these instructions to install and set up your N3400 storage system.
Unpacking the N3400
Use these instructions to unpack the N3400.
Important: If your system was shipped already assembled and cabled in a rack, go directly to “Setting
up and booting the system” on page 18.
Notes:
v
The contents of the box will differ depending on the model you purchased. See step 2 on page 2 for a
list of contents for specific models.
v
Small Form Factor Pluggable (SFP) modules are either in the accessory box or are installed in the fiber
ports of the system unit.
18-32 kg (39.7-70.5 lbs)
svc00167
CAUTION:
The weight of this part or unit is between 18 and 32 kg (39.7 and 70.5 lb). It takes two
persons to safely lift this part or unit. (C009)
1.
Lift the box from the crate, as shown in Figure 1. The contents will remain in place.
Accessory kit:
- IBM rail kit
- power cable
- DB-9 to RJ-45
console adapter
- serial null modem
cable
- cable management
arms
n340001
Figure 1. N3400 packaging
© Copyright IBM Corp. 2010, 2011
1