IBM N Series, Руководство по внедрению

Страница: 75 / 105

Chapter 6: Managing a S ystem with Disks and Array LUNs 61
1
(cont)
◆
-p
pool
Data ONTAP assigns pools automatically for disks. For array LUNs,
the requirements for the
-p
parameter are as follows:
❖
If you are not going to be deploying the SyncMirror feature,
you do not need to enter the pool parameter (
-p
). The pool
parameter defaults to 0 (zero).
❖
If you are going to be deploying SyncMirror, you must use
the pool parameter with array LUNs, and you must enter it
correctly. See the information about RAID mirroring in the
gateway Installation Requirements and Reference Guide for
details.
Command example:
disk assign storeAlun1 storeAlun2 -p 0
disk assign storeBlun1 storeBlun2 -p 1
Typically, pool 0 is assigned to the local pool and pool 1 is assigned
to the remote pool.
Step Action