IBM L5U, Информация по обслуживанию

Страница: 33 / 295

Chapter 1. Start Service
1-17
Web User Interface Error Messages
0321
A Loop ID setup of Drive
#2 failed.
CHK 0321
1. Confirm the drive connection.
2. Verify the drive port configuration (Web User Interface:
Configure Library
→
Physical ).
3. Cycle the power and try again.
4. Replace the drive canister (page 9-11).
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Library Control Blade (page 9-8).
7. Replace the Back Board assembly (page 9-37).
8. Replace the TS3400 Tape Library chassis (page 9-44).
0322
Drive #2 is in Prevent
Cartridge Removal state,
disabling cartridge
removal.
CHK 0322
1. Release the Drive #2 Prevent Medium Removal state from
the host.
2. Cycle the power and try again.
3. Replace the drive canister (page 9-11).
4. Replace the Drive Docking Card (page 9-19).
5. Replace the Library Control Blade (page 9-8).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
Table 1-3. Web user error messages
Title Message Issuing Panel
Error “***” modification failed. *** Setting
Users full. Users
You cannot remove yourself. Users
Parameter Error Login failure. Login
Unsupported update file. Firmware Update
Invalid parameter found in [***]. *** Setting
Please input parameter of [***]. *** Setting
Password parameter error. Users
User name parameter error. Users
Not enough role. Users
User name unmatched. Users
User already exists. Users
Users full. Users
Flush ROM write error detected. Users
User information access failure. Users
Table 1-2. Drive error codes (continued)
Code (H) Description
Panel
indication
Action Required