IBM IntelliStation M Pro 6225, Руководство пользователя

Страница: 54 / 138

Installing a drive in bay 2, 3, or 4
Complete the following steps to install a drive in bay 2, 3, or 4:
1. Read the safety information beginning on page “Safety” on page vii, the
guidelines in “Handling static-sensitive devices” on page 29, and the
documentation that comes with your drive.
2. Turn off the computer and all attached devices; then, disconnect all external
cables and power cords.
3. Remove the side cover (see “Removing the side cover” on page 34).
4. Remove the bezel (see “Removing the bezel” on page 34).
5. Use a screwdriver to pry the filler panel and EMC shield away from the
computer.
EMC shield
Filler panel
Drive retainer
clip
Note: If you are installing a drive that contains a laser, observe the following
safety precaution.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices,
or transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product
could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.
v Use of controls or adjustments or performance of procedures other
than those specified herein might result in hazardous radiation
exposure.
40
IBM IntelliStation M Pro Types 6225 and 6228: User’s Guide