IBM IntelliStation M Pro 6225, Руководство пользователя

Страница: 101 / 138

Replacing the battery
When replacing the battery, you must replace it with a lithium battery of the same
type from the same manufacturer. To avoid possible danger, read and follow the
information in “Safety” on page vii.
To order replacement batteries, call 1-800-426-7378 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,
call your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure your computer and reset
the system date and time.
Complete the following steps to replace the battery:
1. Read the safety information beginning on page vii, “Installation guidelines” on
page 29, and “Handling static-sensitive devices” on page 29.
2. Follow any special handling and installation instructions supplied with the
replacement battery.
3. Turn off the computer and all attached devices. Disconnect all external cables
and power cords; then, remove the computer cover. (See “Removing the side
cover” on page 34.)
4. Remove the battery:
a. Use a fingernail to press the top of the battery clip away from the battery.
The battery pops up when released.
b. Use your thumb and index finger to lift the battery from the socket.
5. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
b. Press the battery down into the socket until it clicks into place. Make sure
the battery clip holds the battery securely.
6. Replace the cover and connect the cables.
7. Turn on the computer.
8. Start the Configuration/Setup Utility program and set configuration parameters.
v
Set the system date and time.
v Set passwords if necessary.
v
Save the configuration.
Chapter 5. Solving problems
87