IBM IntelliStation M Pro 6225, Руководство пользователя

Страница: 80 / 138

The error code format is as follows:
fff-ttt-iii-date-cc-text_message
where:
fff is the three-digit function code that indicates the function being tested when
the error occurred. For example, function code 201 is for memory.
ttt is the three-digit failure code for the exact test failure. (These codes are for
trained service personnel and are described in the Hardware Maintenance
Manual .)
iii is the three-digit device ID. (These codes are for trained service personnel
and are described in the Hardware Maintenance Manual .)
date is the date that the diagnostic test was run and the error recorded.
cc is the check digits that are used to verify the validity of the information.
text_message
is the diagnostic message that indicates the reason for the problem.
Text messages
The diagnostic text message format is as follows:
result test_specific_string
where:
result is one of the following results:
Passed
This test was completed without any errors.
Failed This test discovered an error.
User Aborted
You stopped the test before it was completed.
Not Applicable
You attempted to test a device that is not present in the computer.
Aborted
The test could not proceed because of the computer configuration.
Warning
A possible problem was reported during the test (for example, a
hardware problem that is not related to the hardware currently
being tested.).
test_specific_string
is an error code or other information about the error.
66
IBM IntelliStation M Pro Types 6225 and 6228: User’s Guide