IBM IntelliStation M Pro 6225, Руководство пользователя

Страница: 82 / 138

Diagnostic error message tables
The following tables provide descriptions of the error messages that might be listed
in the test log after you run the diagnostic programs.
Important: If error messages are displayed that are not listed in the following table,
make sure that your computer has the latest level of BIOS code installed.
Code Function Result Text message Action
001 Core system Failed Core Tests Call for service.
System board ECC
005 Video port Failed Any failure message
1. Replace the video
adapter.
2. Call for service.
011 Serial port Integrated serial port
1. Make sure that the
loopback plug is
properly connected to
the external serial
port.
2. Make sure that the
cable from the
external serial port is
properly connected to
the system board.
3. Call for service.
014 Parallel port Integrated parallel port
1. Make sure that the
loopback plug is
connected properly to
the external parallel
port.
2. Call for service.
015 USB interface Aborted Can NOT test USB interface while it is in use.
Note: If you have USB devices attached, you
cannot run the diagnostic program for the USB
interface.
1. Turn off the
computer.
2. Replace the all USB
devices with standard
devices.
3. Turn on the
computer.
4. Run the diagnostic
test again.
Failed Any failure message Call for service.
020 PCI interface Failed System board Call for service.
030 SCSI interface Failed SCSI adapter in slot n failed register/counter/
power test
(where n is the slot number of the failing adapter)
See the information
provided with the adapter
for instructions.
If the problem remains,
call for service.
68
IBM IntelliStation M Pro Types 6225 and 6228: User’s Guide