IBM IntelliStation M Pro 6218, Руководство по диагностике и обслуживанию

Страница: 61 / 168

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing,” on page 65 to determine which components are customer replaceable units
(CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
089-XXX-001 Failed microprocessor test.
1. (Trained service technician only) Make sure
that the microprocessor is installed and seated
correctly.
2. If the computer does not have the latest level
of BIOS code installed, update the BIOS code
to the latest level.
3. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
201-XXX-0nn Failed memory test.
Note: Where nn : 1=DIMM 1; 2=DIMM
2; 3=DIMM 3; 4=DIMM 4.
1. Reseat DIMM nn .
2. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. DIMM nn
b. (Trained service technician only) System
board
201-XXX-999 Multiple DIMM failure, see the error text.
1. See the error text for the failing DIMMs.
2. Reseat the failing DIMMs.
3. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. (Trained service technician only) Failing
DIMMs
b. (Trained service technician only) System
board
206-XXX-000 Failed diskette drive test.
1. Run the test with another diskette.
2. Reseat the diskette drive cables and run the
test again.
3. Replace the following components one at a
time, in the order shown, restarting the
computer each time:
a. Diskette drive cable
b. Diskette drive
c. (Trained service technician only) System
board
Chapter 2. Diagnostics
45