IBM HC10 - BladeCenter - 7996, Руководство по обслуживанию

Страница: 60 / 114

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 7996,” on page 11 to determine which components are CRUs and which
components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
161 Real-time clock battery failure
1. Reseat the battery.
2. Clear CMOS. See “System board jumpers and
buttons” on page 7 for information about how to
clear CMOS.
3. Replace the following components one at a time,
in the order shown, restarting the blade
workstation each time:
a. Battery
b. (Trained service technician only) System
board assembly
162 Invalid configuration information or CMOS
RAM checksum failure.
1. Run the Configuration/Setup Utility program,
select Load Default Settings , and save the
settings.
2. Reseat the battery.
3. Replace the following components one at a time,
in the order shown, restarting the blade
workstation each time:
a. Battery
b. (Trained service technician only) System
board assembly
163 Time of day not set.
1. Run the Configuration/Setup Utility program,
select Load Default Settings , make sure that the
date and time are correct, and save the settings.
2. Reseat the battery.
3. Clear CMOS. See “System board jumpers and
buttons” on page 7 for information about how to
clear CMOS.
4. Replace the following components one at a time,
in the order shown, restarting the blade
workstation each time:
a. Battery
b. (Trained service technician only) System
board assembly
44
BladeCenter HC10 Type 7996: Problem Determination and Service Guide