IBM F16, Руководство пользователя

Страница: 29 / 123

Table 2 lists the power supply requirements.
Table 2. Power supply requirements
Specification Value
Total power 126 watts delivered over temperature range
Input voltage 100 - 240 V ac, auto range
Input line frequency 47 - 63 Hz
Inrush current 10 Amps peak > 300 microseconds (hot or
cold start)
Harmonic distortion Active power factor correction per
IEC1000-3-2
Input line protection Fused in both hot and neutral lines
Maximum dimensions 8.255 cm (3.25 in.) wide, 3.81 cm (1.5 in.)
high, and 36.83 cm (14.5 in.) deep
Redundancy Dual supplies 1+1 redundant-hot-pluggable,
active current share
LEDs
This section describes the LEDs located on front and back panels of the 2109
Model F16.
Front panel
Figure 5 shows the front panel of the 2109 Model F16 switch. The front panel
provides access to the serial port, Ethernet port, and the fiber optic ports, and
shows the corresponding port LED and the power LED.
The ports on the front panel are color-coded in groups (four blue ports alternate
with four blue outlined ports) to indicate which ports you can use in the same ISL
Trunking group.
Note: ISL Trunking is a feature that enables traffic to be evenly distributed across
the links between two adjacent switches while preserving in-order delivery. It
is managed through the software. For more information, see the
Brocade ISL
Trunking User’s Guide .
Back panel
Figure 6 on page 10 shows the back panel of the 2109 Model F16 switch. The back
panel provides access to the fan trays and the power supplies, and shows the
Switch Status LED Ethernet Port
Serial Port
Port Status LED (16X) Port Speed LED (16X)
Optical Port (16X)
SJ000151
Figure 5. Front panel of the 2109 Model F16
Chapter 1. Introduction
9
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|