IBM eServer xSeries 345 Type 8670, Руководство по установке

Страница: 24 / 71

Installing an additional microprocessor
Your server supports up to two microprocessors.
Attention:
v
A startup (boot) microprocessor must always be installed in socket J7 on the
system board.
v
To ensure proper server operation when you install an additional microprocessor,
use microprocessors that have the same cache size and type, and the same
clock speed. Microprocessor internal and external clock frequencies must be
identical.
Notes:
1. To order additional microprocessor options, contact your IBM reseller or IBM
marketing representative.
2. When you install the microprocessor in socket J6, you must also install the
voltage regulator module (VRM) that comes with the microprocessor in VRM
connector J5.
3. The microprocessor speeds are automatically set for this server; therefore, you
do not need to set any microprocessor frequency-selection jumpers or switches.
4. If you need to replace a microprocessor, call for service.
The following illustration is a simplified layout of the microprocessor connector
locations and other microprocessor-related components on the system board.
VRM 2 connector
(J5)
VRM 1 connector
(J8)
Microprocessor 2
(J6)
Microprocessor 1
(J7)
12
IBM xSeries 345 Type 8670: Installation Guide