IBM eServer xSeries 235 Type 8671, Руководство по установке опций

Страница: 81 / 102

Two cable-restraint brackets are on the rear of the tower model servers. After you
connect the cables to the selected devices, you can use these cable-restraint
brackets to manage the cable routing. Route the power cords through the
power-cord restraint bracket on the bottom. Route the remaining cables (for
example, the cables that are connected to the I/O ports) through the I/O
cable-restraint bracket on the top.
See the following illustrations for the locations of the input and output connectors on
your server.
Note: The USB 3 connector is on the front of the server.
1 2
Keyboard
Mouse
Parallel
Serial
RS-485
(ASM interconnect)
USB 2
USB 1
Video
Ethernet
External SCSI
knockout
Optional
external
serial
knockout
Keyboard cabling
There is one keyboard port on the back of the server. Connect a keyboard to this
port.
Pointing device cabling
There is one pointing device port on the back of the server. Connect a pointing
device to this port.
Parallel port cabling
There is one parallel port on the back of the server. You can connect a parallel
device to this port.
Serial cabling
Your server has one standard serial port on the back of the server and one optional
serial port. You can connect a serial devices to these ports.
Chapter 2. Installing options
69