IBM eServer iSeries 8 Series, Руководство пользователя

Страница: 12 / 28

01 B S
should appear in the Function/Display panel and the
manual mode indicator (a small hand) is illuminated. If it does
not appear, repeat steps 6a on page 7 through 6h on page 7.
__ j.
Go to step 7.
__ 7. Press the system unit power-on button. The power-on light will appear.
Note: When the power on and IPL is complete, the IPL or Install the System
display should appear on your system unit console.
__ 8. Select Use Dedicated Service Tools (DST) from the IPL or Install the System
display.
Press Enter.
__ 9. Type
your service tools user ID and service tools password
on the
Dedicated Service Tools (DST) Sign On display.
Press Enter.
__ 10. Select Work with DST Environment from the Use Dedicated Service Tools
(DST) display.
Press Enter.
__ 11. Select System devices from the Work with DST Environment display.
Press Enter.
__ 12. Select Console mode from the Work with System Devices display.
Press Enter.
__ 13.
Select
Twinaxial
from the Select Console Type display.
Press Enter.
__ 14.
Press F3 (Exit) once.
__ 15. Select Perform an IPL from the Use Dedicated Service Tools (DST) display.
Press Enter.
__ 16. Sign on the system unit. Ensure you have service tools authority.
__ 17. Type
strsst
on the command line of the Main Menu .
Press Enter.
__ 18. Select Start a service tool from the System Service Tools (SST) display.
Press Enter.
__ 19. Select Hardware service manager from the Start a Service Tool display. Press
Enter.
__ 20.
Select Packaging hardware resources (system, frames, cards...) from the
Hardware Service Manager display. Press Enter.
__ 21. Type
9
on the System Unit line.
__ 22. Press Page Down if needed and look at the Card Pos column.
__ 23. Verify that the cards you installed or moved appears in the position you
installed them.
__ 24. Your feature upgrade is complete.
__ 25. Press F3 three times and press Enter to get back to the Main Menu .
8
Upgrading the System Unit from Operations Console to Twinaxial Console (5540) V5R2