IBM eServer BladeCenter HS20 Type 8832, Руководство по диагностике и обслуживанию

Страница: 29 / 112

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 7981 and 1884,” on page 53 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Beep code Description Action
3-1-3 RAM test failed above address 0FFFFh.
1. Reseat the DIMMs.
2. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a. DIMMs
b. (Trained service technician only) System
board assembly
3-1-4 Time-of-day clock failed.
1. Reseat the battery.
2. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a. Battery
b. (Trained service technician only) System
board assembly
3-2-1 Serial port failed. (Trained service technician only) Replace the
system board assembly.
3-2-2 Parallel port failed (Trained service technician only) Replace the
system board assembly.
3-2-3 Math coprocessor test failed
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board assembly
3-2-4 Failure comparing CMOS memory size
against actual
1. Reseat the following components:
a. DIMMs
b. Battery
2. Replace the following components one at a
time, in the order shown, restarting the
blade server each time:
a. DIMMs
b. Battery
c. (Trained service technician only) System
board assembly
Chapter 2. Diagnostics
13