IBM eServer 380 xSeries, Руководство пользователя

Страница: 37 / 112

Chapter 4. Configuring your server
23
Setting the administrator password. You can set the administrator password so that
only authorized personnel can change configuration information from within the BIOS
Setup Utility. The keyboard and mouse remain locked until you type the correct
password. You can use any combination of up to seven characters (A-Z, a-z, 0-9, and
blanks) for your administrator password. Keep a record of your password in a secure
place.
Note: Only a qualified service technician can delete the administrator password.
Setting the user password. This password is set for each user, so that the
administrator can control permissions and configuration options for each user. You
can use any combination of up to seven characters (A-Z, a-z, 0-9, and blanks) for your
user password.
The following describes the choices available from the System Management menu.
The following describes the choices available from the Exit menu.
Set Administrator Password Not applicable Define the administrator
password.
Set User Password Not applicable Define the User password
Menu item Default value Description
Console Redirection Not applicable Configures the server for
console redirection.
Service Boot [Disabled]
Enabled Starts the server in Service
Partition Boot mode. This item
will be automatically reset to
Disabled on the next system
start.
Menu item Description
Exit Saving Changes Exit from Setup with or without saving your
changes in CMOS.
Yes Saves your changes and exits from
the utility
No Discards your changes and exits
from the utility
Exit Discarding Changes Exit from Setup with or without discarding
your changes.
Yes Discards your changes and exits
from the utility.
No Saves your changes and exits from
the utility.
Load Setup Defaults Load Setup with factory defaults.
Yes Loads Setup values from a file
previously saved through the Save
Custom Defaults menu item. You
must specify the file name.
No No action.
Menu item Default value Description