IBM eServer 380 xSeries, Руководство пользователя

Страница: 33 / 112

Chapter 4. Configuring your server
19
The following table describes the choices available from the Advanced menu.
Primary menu Item submenu Item value Description
Boot Configuration Plug & Play O/S [No] Yes Configures boot settings. If
the operating system
supports Plug and Play
operation, set this value to
Yes.
Reset Config Data [No] Yes Resets the configuration data
after a restart operation.
Numlock [Off] On Locks the number keypad.
ADM Graphics
Mode [Disabled] Enabled Enables or disables the ADM
graphics mode.
Peripheral
Configuration Serial Port A [Auto]
Enable
Disable Determines serial port A
configuration at startup.
Auto Automatically
determine the base
I/O address and
interrupt to use for
the port.
Enable Requires you to
supply the base I/O
address and the
interrupt value.
Disable Causes the server
to disable the port.
Serial Port B [Auto]
Enable
Disable Determines serial port B
configuration at startup.
Auto Automatically
determine the base
I/O address and
interrupt to use for
the port.
Enable Requires you to
supply the base I/O
address and the
interrupt value.
Disable Causes the server
to disable the port.
Parallel Port [Auto]
Enable
Disable Determines parallel port
configuration at boot time.
Auto Causes the server
to determine the
base I/O address
and interrupt to use
for the port.
Enable Requires you to
supply the base I/O
address and the
interrupt value.
Disable Causes the server
to disable the port.